You've seen "rp" in countless config files and never thought twice. In the OAuth 2. 0 and OpenID Connect world, those two letters carry serious architectural weight: Relying Party. Your mobile app is an RP, and unless you harden it properly, it's the easiest target in your entire identity pipeline.

article

Most blog posts treat RPs as an afterthought - a few bullets on redirect URIs and a warning about client secrets. That misses the real story. The way you build your RP determines your app's security posture, your observability into auth flows. And your ability to adopt passwordless standards like WebAuthn and passkeys.

We've spent the last three years shipping OIDC integrations for iOS and Android clients. In production environments, we found that the worst bugs - token leakage, CSRF, infinite refresh loops - always traced back to a misunderstanding of the RP's role. Let's fix that.

The Core Anatomy of a Relying Party

At its simplest, an RP is a service that delegates identity verification to an Authorization Server (AS). You register your app with the AS, get a client_id and sometimes a client_secret. And then you handle tokens issued by the AS. The RP never stores passwords. It stores tokens, and it must know how to validate them,

That's where the confusion startsMany developers treat the RP as a dumb token receiver. Actually, the RP is responsible for several Security-critical decisions: which redirect URIs are valid, when to reject an authorization code, how to bind a nonce to a session. And how to cache JWKS data without going stale.

The OAuth 2. 0 specification, RFC 6749, defines the RP as the "client". The OpenID Connect Core spec builds on that by adding the id_token and the nonce parameter. Which exists for one purpose: to stop replay attacks against the RP. If you ignore the nonce, you're the problem.

Why Redirect URI Validation Is a Minefield

Your mobile app's redirect URI is the most exploited surface in the entire flow. An attacker who can register a malicious redirect URI on your RP can steal authorization codes and swap them for tokens. We've seen this in the wild with homegrown auth backends that accept wildcards like com example app://callback plus a path.

Exact string matching is non-negotiable. The OIDC spec requires the redirect_uri in the token request to match the one in the authorization request. The AS should reject mismatches, but many real-world AS configurations are lax. If your RP backend doesn't verify the match independently, you're exposed.

On mobile, the redirect scheme also matters. Custom URL schemes like myapp:// can be hijacked by another app on the same device. Use Universal Links (iOS) or App Links (Android) with HTTPS, because those can be verified by the OS. We found that pattern alone killed a whole class of token-stealing attacks in our own apps.

Client Secrets Versus PKCE - The Mobile Reality

Storing a client_secret in a mobile app is pointless. Anyone can decompile the binary and extract it. Native apps must use the Authorization Code flow with PKCE (RFC 7636) and no secret at all. The secret is a public-key proof that your app is the same actor that started the flow.

We've audited dozens of mobile apps that still use a hardcoded secret. It works, sure, until a security researcher posts your app's secret on GitHub. Then every token request can be replayed. PKCE makes the secret unnecessary because the attacker lacks the code_verifier that matches the code_challenge.

One nuance: if your mobile app talks to your own backend. Which then talks to the AS, your backend is a confidential RP should use a client secret. The mobile app becomes a public RP, and keep those two roles separateDon't collapse them into a single token endpoint call from the device.

From OIDC to WebAuthn: The Evolving RP Role

Relying Party isn't just an OIDC term anymore. In WebAuthn, the RP is the entity that registers and verifies passkeys. The RP has a unique ID - a domain - and it must store public keys and sign counters for each authenticator. That's a different kind of responsibility than handling OAuth tokens,, and yet people call it the same thing

This convergence creates a design problem. OIDC RPs are stateless; they validate JWT signatures and move on. WebAuthn RPs must be stateful, tracking credential IDs and sign counts. If you're building a next-generation login flow, you're essentially maintaining two RP implementations that share a single user database.

We wrote a lightweight passkey service for a fintech customer in 2023. The hardest part wasn't the crypto - it was managing RP ID propagation across development, staging. And production domains. One typo in the RP ID broke all authenticators, and the WebAuthn spec requires exact rpid matching, and browsers are merciless about it.

JWKS Caching, Token Validation, and Observability

Every RP must validate the id_token's signature. That means fetching the AS's JSON Web Key Set (JWKS) and caching it. If you fetch the JWKS on every request, you'll hammer the AS and add milliseconds of latency. If you cache it forever, you'll accept tokens signed with a compromised key.

The right pattern is a time-based cache with a refresh interval of five to fifteen minutes. Respect the Cache-Control header on the JWKS endpoint. Also check the kid header on the JWT against the cached keys. We saw one production incident where the AS rotated keys and the RP kept its old cache for six hours, rejecting every new sign-in.

Observability is just as critical. Log the auth_time, the acr value. And the sub claim - but never the full token. Correlate the RP's logs with the AS's jti. That made debugging a refresh-token race condition between iOS and Android possible in our own stack. Without it, we'd still be staring at conflicting error messages.

Keycloak, Auth0. And the Vendor Trap

Every major identity provider - Auth0, Okta, Keycloak, Cognito - gives you a pre-built RP SDK. These SDKs are convenient, but they come with a hidden cost. You inherit the vendor's assumptions about your architecture. When your use case deviates, you fight the abstraction instead of building against a standard.

We ran into this with a subscription app that needed audience restrictions beyond what a generic OIDC SDK exposes. The SDK accepted any aud claim. Which let one client's token be replayed on another client's API. We shipped a custom validator that checks the aud, azp, iss claims before the SDK even processes the JWT.

Don't ditch the SDK wholesale. Instead, treat it as a transport layer and add your own validation at the boundaries. The OIDC spec is your contract. Your RP logic - not the vendor's - defines what a valid session looks like in your product.

Practical Checklist for Hardening an RP

  • Use exact redirect URI matching; reject wildcards and path variants.
  • On mobile, prefer Universal Links / App Links over custom schemes.
  • add PKCE for all public RPs; avoid client secrets in native apps.
  • Validate nonce and state values on every response.
  • Keep JWKS cache TTL under 15 minutes; refresh based on HTTP headers.
  • Check aud, iss, exp, iat, azp claims on every token.
  • Store tokens in the OS Keychain/Keystore, never in SharedPreferences or UserDefaults.
  • Monitor token issuance and rejection rates with structured logs.

Run this checklist during a threat-modeling exercise, not just before a release. The differences between a compliant RP and a hardened one are subtle. We've seen apps pass security questionnaires on paper and then leak tokens through a print statement in a debug build. Production behavior is what matters.

If you're building a custom AS, remember that the RP is only one half of the equation. The AS must enforce the same URI matching and nonce checks. Security works only when both sides hold each other to the spec. Blaming the other side is a classic failure mode.

Frequently Asked Questions

What does "rp" stand for in OAuth and OIDC,

"RP" stands for Relying PartyIt's the client application that delegates authentication to an authorization server and relies on the identity assertions it receives.

Can a mobile app use a client secret,

Technically yes, but practically noAny secret stored in a mobile binary can be extracted. Use the Authorization Code flow with PKCE for public clients - that's the current best practice.

What is the difference between RP and authorization server?

The RP is the application the user is trying to access. The authorization server issues tokens and validates credentials. The RP consumes tokens; the AS produces them.

Why is the nonce parameter important for RPs?

The nonce binds the authorization response to the original session. Without it, an attacker can replay an intercepted id_token and impersonate the user. Nonce verification is mandatory in OIDC.

Does WebAuthn use the same RP concept as OIDC?

The term overlaps but the mechanics differ. In WebAuthn, the RP has an ID and registers public keys. In OIDC, the RP validates JWT signatures and manages session state, and both require strict claims verification

Build Your RP Right the First Time

Your mobile app gets featured on Product Hunt, thousands of users sign in. And then someone posts your redirect URI exploit in a security advisory. That's the scenario we keep failing to prevent because teams treat RP configuration as boilerplate.

We're a Denver-based mobile app development company that has shipped more OIDC integrations than we can count. We can audit your existing auth flow, re-architect the RP layer. And implement passkeys or enterprise SSO without breaking your release schedule. Contact us for a free token-flow review - we'll tell you exactly where your identity stack leaks.

What do you think?

Do you think most mobile teams under-commission the RP because the SDK hides too much complexity?

Should we move to an ROPC-like model where the mobile app talks directly to a backend that acts as the sole RP,? Or is PKCE enough to trust the client?

If WebAuthn and OIDC both call you an RP,? Which identity standard should get the final say in your architecture - and why,

Need a Custom App Built?

Let's discuss your project and bring your ideas to life.

Contact Me Today →

Back to Online Trends